BOBO BM10M Mirror Mount Fully Waterproof Bike/Motorcycle/Scooter Mobile Phone Holder Mount, Ideal for Maps and GPS Navigation (Black)

9 reviews for BOBO BM10M Mirror Mount Fully Waterproof Bike/Motorcycle/Scooter Mobile Phone Holder Mount, Ideal for Maps and GPS Navigation (Black)

1. 

   Tanmoy Kar – 5 seconds ago

   Great quality at premium price
   I loved the product. It is firm and secure. I can tell the product will last a long time for sure. The closing panels are so tight that sometime I need to use huge force to open it. But it shows the product quality that you can be rest assured that it won’t be loose. In terms of waterproofing, it is great. I drove my bike in 70 kmph in heavy rain and it didn’t let a drop of water get inside. The variant I purchased is wired or wireless charging, I didn’t use the charging facility a lot so can’t comment on how fast does it charge wirelessly, but it does its job perfectly. The only drawback is it’s price. I bought it at almost 4.5k and this is quite expensive for many of us. So if you are looking for a best waterproof phone holder, be it iPhone or Android, and want to have wireless and wired charging facility then go for it if your budget allows.

   Is it helpful?
2. 

   Placeholder – 5 seconds ago

   Good Sturdy built. But size coud be an issue
   Recently bought this for s22ultra and found it to be working absolutely fine . Have ridden 7 hrs in 2 rides and the phone did not heat up in cludind 1.5 hrs of charging. There was some amount of fogging inside for some time other than that it worked well including touch. The only sad part was removal of the thinnest silicon cover that I had on my phone. Also had to put a piece of tire tube to tighten it properly without which it was slowley moving down.Price could be a bit less though. Yhe current cost is beyond my understand.

   Is it helpful?
3. 

   Ok Boy – 5 seconds ago

   Good product, but way pricey…
   Delivery was timely, and the product is as advertised. Review based on usage on a RE Meteor 350 on a 2000 km ride.Installation of the handle mount -The M3 tape that was provided with the product is completely useless. Was unable to hold the handle mount in place. Also, the handle mount is not meant to be installed on the (naturally) bent portions of the motor cycle handle. You have to install it in such a manner that the phone case sits exactly on top of the handle mount else the phone case movement angle gets restricted. I had to discard the M3 tape and use a rubber tube piece to fill the gap between the clamp of the handle mount and the motor cycle handle to ensure enough grip so that the handle mount doesn’t move.Installation of the phone case -Fitting the phone case on the handle mount was very easy. Simply unscrew the plastic bolt at the bottom, sit the phone case on the handle mount, and tighten the plastic bolt. Do note that the plastic bolt will not fit and tighten if the phone case is fitted in extreme or very odd angles. This is where the limitation comes in. Keeping the handle mount as the center of axis, you can easily get a 250 to 260 degrees rotation of the phone case and that’s good enough. Considering the almost continuous usage of the entire setup for a 2000 km ride proves it’s worth!!Usage of the phone case -This is what matters the most, and this is where it did the job exactly as advertised. The ‘shock absorber’ mechanism (if you want to call it that) showed it’s mettle and functionality very well. I have a Moto G73 5G handset which was my GPS navigator. It also has the default outer cover but worked superbly well inside the phone case. Touch functionality worked well inside the case. But what you need to note is that if you put a phone with a cover whose screen side edges are a bit raised (this is a normal feature of phone cases now a days to protect the phone screen in case the phone is kept face down for any reason) then this will interfere to a certain extent with the touch functionality given that the phone case screen and the phone screen itself will have a certain gap between them. This interference also comes in if you don’t place the phone evenly inside the phone case. The charging slot worked superbly, but with a USB C cable whose USB C port is not very thick. Downside of the case – In hot/humid conditions, there’s no way for the phone to dissipate heat and gets very hot if kept inside the case for extended hours.Overall, a product that does the job well but is definitely very highly priced considering it’s quality. Is nowhere in competition with SP Connect line of products, but is way less pricey than them.

   Is it helpful?
4. 

   Amazon Customer – 5 seconds ago

   Sturdy and Trustworthy Product
   Pros:1. Product seems and feels sturdy to the touch.2. Screen is responsive when inside the holder.3. Proper tools and kits are provided to make self installation easy for beginners.4. Waterproof cause it has a silicon layering.5. Vibration damper works perfectly.Cons:1. Slightly overpriced.2. Phones with bully back covers do not fit.

   Is it helpful?
5. 

   Prashant Mittal – 5 seconds ago

   Fits nicely. Waterpoof. Sturdy.
   Best i believe of all the available ones. Best build quality

   Is it helpful?
6. 

   Mridul – 5 seconds ago

   Product looks sturdy except the front plastic screen
   Much needed product as I use the maps regularly and hopefully this will be helpful to satisfy my needs. The only thing that concerns me is the front screen as it is flimsy and not sure how long it sustain. Will update the status overtime.

   Is it helpful?
7. 

   Rakesh Kulkarni – 5 seconds ago

   Good Product for all the Bikes
   The Phone Holder is sturdy, easy to install, and offers excellent phone protection, even in rain. The 360-degree rotation is perfect for adjusting angles on the go, and the touchscreen works smoothly.The box was torn upon arrival, but the product inside was new and unused.However, I wouldn’t recommend it for scooters. For scooter you can go for the mirror mount option.

   Is it helpful?
8. 

   Prateek D – 5 seconds ago

   The Internal Phone Pusher a the center just fell off and now can’t use the touchscreen
   The Product is not ready for use at the price point I would not expect it to be this disappointing from practicality standpoint, so I would suggest look for some other solution.1) Touchscreen plastic does not work correctly, so it becomes a distraction and you will end up on the side of the road struggling with it.2) The Plastic locks on the 3 sides fold in when you open so when you close they 98% of time invisibly block the panel and would break soon.3) Major Flaw: The Center Pusher Plate that is suppose to push the phone closer to the touchscreen plastic , just falls off and I already lost 2 springs out of 4 that support it, it happened while just taking the phone out, left me searching in the dirt of those springs for 20 mins… found 2.. SO beware…4) The Plastic captures moisture on the inside, so your phone may not be as protected as it may seem.5) Charging Port , is made in such a way that the rubber almost always comes in the way of closing the center bottom lock, adds struggle since you always need to plug out the charger cable from the mount every time you take your phone out, even more.. if your phone is not large , because you need a specific size connector to get through that hole for the charger and try plugging in your phone all without opening the mount.

   Is it helpful?
9. 

   Juan Fernando Gomez – 5 seconds ago

   Es un producto de gama alta, me gusta mucho su construcción, las bisagras son duritas, son fuertes, se siente robusto, es un producto de alta calidad. Carga muy bien de manera inalámbrica.Puntos por mejorar:1. No es magsafe ni tiene ningún acople magnético, lo cual hace que al poner el celular en la cajita, se descuelga y siempre queda torcido o muy bajito. (iPhone 13).2. El soporte técnico con el fabricante es bueno, pero podrían ser un poco más amables o diligentes.3. Si el producto no tiene las características que hacen falta, deberían vender algún complemento para que quedara 100% funcional y que se acomode a diferentes tamaños o modelos de teléfono.En conclusión, entendiendo que no es un producto completo y que por el precio podría tener mejores características, sí lo volvería a comprar y le haría los mismos complementos caseros que ya le hice al mio.

   Is it helpful?